JD-2000 waa laba qaybood oo ka kooban dareere-free rinji dabaqa epoxy.Muuqaal fiican, boodhka & daxalka u adkaysta oo si sahlan loo nadiifiyo.Nidaamka sagxadda wuxuu si fiican ugu xidhi karaa saldhigga adag wuxuuna leeyahay naaxinta wanaagsan iyo xidhashada caabbinta.Dhanka kale, waxay leedahay adayg gaar ah, jaban-iska caabin waxayna istaagi kartaa miisaan gaar ah.Awoodda cadaadiska iyo awoodda iska caabbinta saameyntu sidoo kale waa mid aad u fiican.

Halka laga Isticmaalayo:
Waxaa inta badan loo isticmaalaa meelaha aan siigada lahayn iyo kuwa aan bakteeriyada ahayn sida warshadda cuntada, warshadda dawooyinka, isbitaallada, mashiinnada saxda ah, warshad elektarooniga ah, iwm.

Xogta Farsamada:
Waqtiga qalajinta: taabo qallayl: 2 saacadood qallayl adag: 2 maalmood
Awood cadaadis (Mpa): 68
Xoogga iska caabinta saamaynta (Kg·cm): 65
Xoog dabacsanaanta (Mpa): 40
Darajada xoogga xabagta: 1
Qalin adag (H): 3
Iska caabbinta abrasion (750g/1000r, eber cufisjiid, g)≤0.03
Iska caabinta saliidda mishiinka, saliidda naaftada muddo 60 maalmood ah: wax isbeddel ah ma jiro.
Iska caabinta 20% sulfuric acid muddo 20 maalmood ah: wax isbeddel ah ma jiro
Iska caabinta 20% Sodium hydroxide muddo 30 maalmood ah: wax isbeddel ah ma jiro
Iska caabbinta toluene, ethanol 60 maalmood: isbeddel ma jiro
Nolosha adeegga: 8 sano

Isticmaalka lagu taliyay:
Midka koowaad: 0.15kg/sqm Koodhka hoose: 0.5kg/sqm+Quartz budada: 0.25kg/sqm jaakada sare: 0.8kg/sqm

Tilmaamaha codsiga:
1. Diyaarinta dusha sare： Diyaarinta substrate-ka saxda ah ayaa muhiim u ah waxqabadka ugu fiican.Dusha sare waa in ay ahaataa mid sanqadh, nadiif ah, qalalan oo aan lahayn qaybo dabacsan, saliid, dufan, iyo wasakh kale.
2. Hordhac: Diyaari foosto, ku shub JD-D10A iyo JD-D10B oo ku salaysan 1: 1.Si fiican u walaaq isku dar ah ka dibna mari rullaluistemadka ama tuwaal.Isticmaalka tixraaca waa 0.15kg / ㎡. Ujeedada ugu weyn ee asaasiga ah waa in si buuxda loo xiro substrate-ka oo laga fogaado hawo-xumo ku jira jaakada jirka.Jaakad labaad ayaa laga yaabaa in loo baahdo iyadoo ku xiran xaaladda nuugista saliidda ee substrate.Waqtiga dib-u-soo-celinta waa qiyaastii 8 saacadood.
Heerka kormeerka asaasiga ah: xitaa filim leh iftiin gaar ah.
3. Koodhka hoostiisa: Isku qas WTP-MA iyo WTP-MB oo ku salaysan 5:1 marka hore, ka dibna ku dar budada quartz (1/2 ee isku dhafka A iyo B) isku dar ah, si fiican u walaaq oo marso maraq.Tirada isticmaalka A iyo B waa 0.5kg/sqm.Waxaad samayn kartaa hal jaakad hal mar ama laba jaakad laba jeer.Xaaladda labaad, muddada codsigu waxay ku saabsan tahay 8 saacadood at 25 darajo.Ciid lakabka kowaad, nadiifi ka dibna mari lakabka labaad.Codsiga oo dhan ka dib, sug 8 saacadood oo kale, shiid, nadiifi boodhka cammuudda ka dibna sii wad habka xiga.
Heerka kormeerka jaakad-hoosaadka: Aan ku dheggan gacanta, ma jilcin, ma daabacan cidiyaha haddii aad xoqdo dusha.
4. jaakad sareIsku qas JD-2000A iyo JD-2000B iyadoo loo eegayo 5:1 ka dibna mari isku darka maraq.Tirada isticmaalku waa 0.8-1kg/sqm.Hal jaakad ayaa ku filan.
5. Dayactirka: 5-7 maalmood.Ha isticmaalin hana ku dhaqin biyo ama kiimikooyin kale.

Nadiifi
Qalabka iyo qalabka ku nadiifi tuwaalada waraaqaha ah, ka dibna ku nadiifi qalabka dareeraha ka hor inta uusan rinjigu adkayn